the bridge of the guitar bounced across the floor and fell down the air conditioning duct. If I remember the story correctly, they spent quite some time using a coat hanger and chewing gum trying to rescue the bridge from the duct. He retrieved it and managed to keep his job, living to restring the guitar another day. But not all six strings at once!But I digress http://www.dbfrtn.com . Some people work in pairs of strings at a time, I prefer to work on individual strings. You will quickly decide what works best for you. Use this article as a guideline to get you up to speed quickly.OK, let's get down to it. I always start with the high E string (personal preference); it helps keep me organized. If your guitar has a locking nut tremolo (whammy bar) system you will have to unlock it.It works best if you remove the clamps completely and work with just the nut until the restringing process is done and the strings are stretched and tuned. Then replace the locking clamps and fine tune using the tuners on the tremolo bridge.· Use your string winder and loosen the string until there is enough slack that you can unwind the string from the tuning post by hand. Use your wire cutters to cut off the curled end of the string and discard. Do this to minimize the chance of scratching the finish of your guitar http://www.dbfrtn.com .
Полный спектр услуг по подбору, обучению, трудоустройству
+7(921) 903-08-92
с 10:00 до 18:00 пн-пт
Добавить комментарий